CVE-2026-99552

Published Nov 19, 2026

Description

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: drain join handlers before releasing module text The code for a registered DLM handler must remain resident until its last invocation finishes. dlm_unregister_net_handlers() only removes dlm_join_handlers from the o2net registry. o2net_handler_get() takes a kref on the wrapper, but that reference does not pin ocfs2_dlm text. o2net_process_message() calls nh_func after dropping o2net_handler_lock. With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of ocfs2_stack_o2cb while nodemanager continues handling messages from a configured, heartbeating peer. If no dependent module or module reference prevents normal unload, the following ordering is possible: Receive worker Module unload -------------- ------------- o2net_handler_get() take wrapper kref drop handler lock <preempted> dlm_exit() unregister handlers release DLM module text call saved nh_func in released module text Use o2net_unregister_and_flush_handler_list() in the shared DLM unregister helper. It first prevents new lookups, then waits for the ordered o2net workqueue to drain, including a concurrent destruction of that queue. The acquired invocation therefore finishes before dlm_exit() returns and the loader releases the callback code. The same helper covers partial registration and dlm_init() error unwind before module memory is released. Skip the drain when the private join-handler list is empty. Early dlm_init() failures can reach this helper before any handler has been published. Partial-registration failure also reaches it a second time after the first call has already unregistered and drained the list. Neither case needs to take o2net_wq_mutex or drain unrelated work. The list is changed only by serialized module init/exit paths; a nonempty list still uses the full unregister-and-flush helper. Oops report as below: Oops: int3: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware identification omitted. Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager] RIP: 0010:0xffffffffc0423871 [Instruction byte dump omitted.] Register dump omitted. Call Trace: <TASK> ? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager] ? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager] ? lock_acquire+0x190/0x300 ? process_one_work+0x935/0x1b40 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 ? kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm] ---[ end trace 0000000000000000 ]---

Is your site exposed to CVE-2026-99552?

Run a free security scan — no signup, results in seconds.

References

Frequently Asked Questions

What is CVE-2026-99552? +
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: drain join handlers before releasing module text The code for a registered DLM handler must remain resident until its last invocation finishes. dlm_unregister_net_handlers() only removes dlm_join_handlers from the o2net registry. o2net_handler_get() takes a kref on the wrapper, but that reference does not pin ocfs2_dlm text. o2net_process_message() calls nh_func after dropping o2net_handler_lock. With CONFIG_OCFS2_FS_O2CB=m, ocfs2_dlm can be loaded independently of ocfs2_stack_o2cb while nodemanager continues handling messages from a configured, heartbeating peer. If no dependent module or module reference prevents normal unload, the following ordering is possible: Receive worker Module unload -------------- ------------- o2net_handler_get() take wrapper kref drop handler lock <preempted> dlm_exit() unregister handlers release DLM module text call saved nh_func in released module text Use o2net_unregister_and_flush_handler_list() in the shared DLM unregister helper. It first prevents new lookups, then waits for the ordered o2net workqueue to drain, including a concurrent destruction of that queue. The acquired invocation therefore finishes before dlm_exit() returns and the loader releases the callback code. The same helper covers partial registration and dlm_init() error unwind before module memory is released. Skip the drain when the private join-handler list is empty. Early dlm_init() failures can reach this helper before any handler has been published. Partial-registration failure also reaches it a second time after the first call has already unregistered and drained the list. Neither case needs to take o2net_wq_mutex or drain unrelated work. The list is changed only by serialized module init/exit paths; a nonempty list still uses the full unregister-and-flush helper. Oops report as below: Oops: int3: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 0 PID: 54 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware identification omitted. Workqueue: o2net o2net_rx_until_empty [ocfs2_nodemanager] RIP: 0010:0xffffffffc0423871 [Instruction byte dump omitted.] Register dump omitted. Call Trace: <TASK> ? o2net_rx_until_empty+0x19b1/0x3300 [ocfs2_nodemanager] ? __pfx_o2net_rx_until_empty+0x10/0x10 [ocfs2_nodemanager] ? lock_acquire+0x190/0x300 ? process_one_work+0x935/0x1b40 ? process_one_work+0x834/0x1b40 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? process_one_work+0x9a8/0x1b40 ? __pfx_process_one_work+0x10/0x10 ? lock_acquire+0x190/0x300 ? lock_is_held_type+0x8f/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? worker_thread+0x65c/0xe40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0x177/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_worker_thread+0x10/0x10 ? kthread+0x351/0x460 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x659/0x940 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x74f/0xf70 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ocfs2_nodemanager [last unloaded: ocfs2_dlm] ---[ end trace 0000000000000000 ]---
How do I check if I'm vulnerable to CVE-2026-99552? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-99552 — free, no signup required.

Patch and protect

Block known exploits with a web application firewall while you patch, keep your own devices clean, or test the fix on a fresh server.

Compare VPS prices →

Affiliate links: we may earn a commission, your price stays the same.