CVE-2026-98798

Published Oct 18, 2026

Description

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix NULL dereference in set_coalesce before first open The Rx ring priv and index are only set in bcmgenet_init_rx_ring(), which runs at open. Setting the Rx coalescing parameters on an interface that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences a NULL ring->priv. The oops happens with RTNL held, so networking stays stuck until a reboot: Unable to handle kernel paging request at virtual address 0000000000002788 pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 lr : bcmgenet_set_coalesce+0xe8/0x180 Call trace: bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P) __ethnl_set_coalesce.isra.0+0x490/0x570 ethnl_set_coalesce+0x48/0xc0 ethnl_default_set_doit+0xf4/0x230 genl_family_rcv_msg_doit+0xe8/0x160 genl_rcv_msg+0x220/0x2a0 netlink_rcv_skb+0x68/0x140 genl_rcv+0x40/0x60 netlink_unicast+0x338/0x3c0 netlink_sendmsg+0x19c/0x3f8 __sock_sendmsg+0x64/0xc0 __sys_sendto+0x124/0x198 __arm64_sys_sendto+0x30/0x48 Set priv and index at probe. Writing the registers while the interface is down is harmless because open resets the MAC and bcmgenet_init_rx_coalesce() reapplies the stored values. It was observed on a Raspberry Pi CM4, but should apply to all other genet devices.

Is your site exposed to CVE-2026-98798?

Run a free security scan — no signup, results in seconds.

References

Frequently Asked Questions

What is CVE-2026-98798? +
In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix NULL dereference in set_coalesce before first open The Rx ring priv and index are only set in bcmgenet_init_rx_ring(), which runs at open. Setting the Rx coalescing parameters on an interface that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences a NULL ring->priv. The oops happens with RTNL held, so networking stays stuck until a reboot: Unable to handle kernel paging request at virtual address 0000000000002788 pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 lr : bcmgenet_set_coalesce+0xe8/0x180 Call trace: bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P) __ethnl_set_coalesce.isra.0+0x490/0x570 ethnl_set_coalesce+0x48/0xc0 ethnl_default_set_doit+0xf4/0x230 genl_family_rcv_msg_doit+0xe8/0x160 genl_rcv_msg+0x220/0x2a0 netlink_rcv_skb+0x68/0x140 genl_rcv+0x40/0x60 netlink_unicast+0x338/0x3c0 netlink_sendmsg+0x19c/0x3f8 __sock_sendmsg+0x64/0xc0 __sys_sendto+0x124/0x198 __arm64_sys_sendto+0x30/0x48 Set priv and index at probe. Writing the registers while the interface is down is harmless because open resets the MAC and bcmgenet_init_rx_coalesce() reapplies the stored values. It was observed on a Raspberry Pi CM4, but should apply to all other genet devices.
How do I check if I'm vulnerable to CVE-2026-98798? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-98798 — free, no signup required.