CVE-2026-92502

Published Sep 17, 2026

Description

In the Linux kernel, the following vulnerability has been resolved: ext4: clear stale xarray tags on folios skipped during writeback In data=journal mode, the writeback thread can hit the WARN_ON_ONCE(sb_rdonly(sb)) in ext4_journal_check_start() while the superblock is being remounted read-only during reboot: Workqueue: writeback wb_workfn (flush-253:0) RIP: 0010:ext4_journal_check_start+0x8b/0xd0 Call Trace: __ext4_journal_start_sb+0x3c/0x1e0 mpage_prepare_extent_to_map+0x4af/0x580 ext4_do_writepages+0x3c0/0x1080 ext4_writepages+0xc8/0x1a0 do_writepages+0xc4/0x180 __writeback_single_inode+0x45/0x2f0 writeback_sb_inodes+0x26b/0x5d0 __writeback_inodes_wb+0x54/0x100 wb_writeback+0x1ac/0x320 wb_workfn+0x394/0x470 And followed by the warning: EXT4-fs warning (device vda1): ext4_evict_inode:195: inode #6263: comm (sd-umount): data will be lost This issue is not reproduced every time, but frequently. The reproduction step is to create a VM with 8 CPUs, 16G memory and setup data=journal: sudo tune2fs -o journal_data /dev/vda1 Run fio: rm -f fiotest fio --name=fiotest --rw=randwrite --bs=4k --runtime=6 --ioengine=libaio --iodepth=256 --numjobs=8 --filename=fiotest --filesize=30G --group_reporting Reboot the VM, and check the console output from: virsh console testvm But there is no dirty inode, folio_clear_dirty_for_io clears PG_dirty but leaves tags PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE set which are only cleared by __folio_start_writeback. In data=journal mode, jbd2 checkpoints the journalled data to its final location and clears its own dirty flag without touching folio PG_dirty or xarray dirty flags. The commit f4a2b42e7891 ("ext4: fix stale xarray tags after writeback") fixes when PG_dirty is still set but there is no dirty page. Another case is PG_dirty is cleared, but PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE is still set. In this case, writeback thread checks clean folio and skips it in mpage_prepare_extent_to_map: if (!folio_test_dirty(folio) || ... folio_unlcok(folio); continue And never reaches ext4_bio_write_folio where the commit f4a2b42e7891 clears the stale xarray tags. Print debug logs after the filesystem is remounted read-only: writepages RDONLY nrpages=2048 dirtytag=1 wbtag=0 towrite=1 sync=0 And all folios are actually clean: folio idx=3 dirty=0 wb=0 checked=0 dirtybuf=0 jbddirty=0 mapped=1 ... We need to clear the xarray stale tags for such clean folios by cycling them through writeback in the skip path, the same way f4a2b42e7891 does in ext4_bio_write_folio.

Is your site exposed to CVE-2026-92502?

Run a free security scan — no signup, results in seconds.

References

Frequently Asked Questions

What is CVE-2026-92502? +
In the Linux kernel, the following vulnerability has been resolved: ext4: clear stale xarray tags on folios skipped during writeback In data=journal mode, the writeback thread can hit the WARN_ON_ONCE(sb_rdonly(sb)) in ext4_journal_check_start() while the superblock is being remounted read-only during reboot: Workqueue: writeback wb_workfn (flush-253:0) RIP: 0010:ext4_journal_check_start+0x8b/0xd0 Call Trace: __ext4_journal_start_sb+0x3c/0x1e0 mpage_prepare_extent_to_map+0x4af/0x580 ext4_do_writepages+0x3c0/0x1080 ext4_writepages+0xc8/0x1a0 do_writepages+0xc4/0x180 __writeback_single_inode+0x45/0x2f0 writeback_sb_inodes+0x26b/0x5d0 __writeback_inodes_wb+0x54/0x100 wb_writeback+0x1ac/0x320 wb_workfn+0x394/0x470 And followed by the warning: EXT4-fs warning (device vda1): ext4_evict_inode:195: inode #6263: comm (sd-umount): data will be lost This issue is not reproduced every time, but frequently. The reproduction step is to create a VM with 8 CPUs, 16G memory and setup data=journal: sudo tune2fs -o journal_data /dev/vda1 Run fio: rm -f fiotest fio --name=fiotest --rw=randwrite --bs=4k --runtime=6 --ioengine=libaio --iodepth=256 --numjobs=8 --filename=fiotest --filesize=30G --group_reporting Reboot the VM, and check the console output from: virsh console testvm But there is no dirty inode, folio_clear_dirty_for_io clears PG_dirty but leaves tags PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE set which are only cleared by __folio_start_writeback. In data=journal mode, jbd2 checkpoints the journalled data to its final location and clears its own dirty flag without touching folio PG_dirty or xarray dirty flags. The commit f4a2b42e7891 ("ext4: fix stale xarray tags after writeback") fixes when PG_dirty is still set but there is no dirty page. Another case is PG_dirty is cleared, but PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE is still set. In this case, writeback thread checks clean folio and skips it in mpage_prepare_extent_to_map: if (!folio_test_dirty(folio) || ... folio_unlcok(folio); continue And never reaches ext4_bio_write_folio where the commit f4a2b42e7891 clears the stale xarray tags. Print debug logs after the filesystem is remounted read-only: writepages RDONLY nrpages=2048 dirtytag=1 wbtag=0 towrite=1 sync=0 And all folios are actually clean: folio idx=3 dirty=0 wb=0 checked=0 dirtybuf=0 jbddirty=0 mapped=1 ... We need to clear the xarray stale tags for such clean folios by cycling them through writeback in the skip path, the same way f4a2b42e7891 does in ext4_bio_write_folio.
How do I check if I'm vulnerable to CVE-2026-92502? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-92502 — free, no signup required.