CVE-2026-90590

MEDIUM
Published Nov 9, 2026 Modified Nov 12, 2026 CWE-772

Description

The NXP ENET QoS Ethernet driver in drivers/ethernet/eth_nxp_enet_qos serialises transmission with a binary semaphore, data->tx.tx_sem, taken in eth_nxp_enet_qos_tx() and returned only by the transmit-completion interrupt handler tx_dma_done(). A frame that has been handed to the transmit DMA when the Ethernet link goes down is never written back, so that completion interrupt never arrives. The PHY callback eth_nxp_enet_qos_phy_cb() reacts to carrier loss only by calling net_eth_carrier_set(); it does not stop the DMA, take the descriptors back or release the outstanding frame, and no timeout exists to do so. The trigger is a link-down/link-up transition that lands while a frame is under the transmit DMA. It can be produced by anyone who controls the link partner or the cable — for example by administratively downing and restoring the attached switch port, or by restarting auto-negotiation from a peer device — and can be made reliable by generating traffic that keeps the device transmitting and repeating the transition. No credentials or user interaction are required, and the trigger is at the link layer rather than over IP. Because the semaphore is never given back, every subsequent call to eth_nxp_enet_qos_tx() fails with -EBUSY for the remaining life of the boot; restoring the link does not recover the interface, since the link-up path only rewrites MAC_CONFIGURATION. The affected interface continues to receive but can no longer transmit anything — no ARP replies, no TCP acknowledgements, no DHCP renewals — until the device is reset. The net_pkt and the net_buf fragments of the abandoned frame are likewise never unreferenced and never return to their pools. The security-relevant property is persistence: a momentary link flap leaves the interface permanently unable to send, so the denial of service outlasts the attacker's access to the link. There is no confidentiality or integrity impact. The fix adds a claim/release pair around the outstanding packet so that completion and abandonment are mutually exclusive, aborts an outstanding frame from the PHY callback on carrier loss (stopping the DMA, flushing the MTL transmit queue and reinitialising the descriptor ring), and arms a transmit watchdog, CONFIG_ETH_NXP_ENET_QOS_TX_TIMEOUT_MS, so that any non-completing DMA — not only a carrier loss — reclaims the transmit slot and the packet.

Is your site exposed to CVE-2026-90590?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

6.5
MEDIUM
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

EPSS — Exploit Prediction

0.0018
Probability of exploitation
0.07%
Percentile rank

EPSS estimates the probability that this vulnerability will be exploited in the wild within the next 30 days. A higher score means more likely to be exploited.

Weakness Type (CWE)

CWE-772 CWE-772

References

Frequently Asked Questions

What is CVE-2026-90590? +
The NXP ENET QoS Ethernet driver in drivers/ethernet/eth_nxp_enet_qos serialises transmission with a binary semaphore, data->tx.tx_sem, taken in eth_nxp_enet_qos_tx() and returned only by the transmit-completion interrupt handler tx_dma_done(). A frame that has been handed to the transmit DMA when the Ethernet link goes down is never written back, so that completion interrupt never arrives. The PHY callback eth_nxp_enet_qos_phy_cb() reacts to carrier loss only by calling net_eth_carrier_set(); it does not stop the DMA, take the descriptors back or release the outstanding frame, and no timeout exists to do so. The trigger is a link-down/link-up transition that lands while a frame is under the transmit DMA. It can be produced by anyone who controls the link partner or the cable — for example by administratively downing and restoring the attached switch port, or by restarting auto-negotiation from a peer device — and can be made reliable by generating traffic that keeps the device transmitting and repeating the transition. No credentials or user interaction are required, and the trigger is at the link layer rather than over IP. Because the semaphore is never given back, every subsequent call to eth_nxp_enet_qos_tx() fails with -EBUSY for the remaining life of the boot; restoring the link does not recover the interface, since the link-up path only rewrites MAC_CONFIGURATION. The affected interface continues to receive but can no longer transmit anything — no ARP replies, no TCP acknowledgements, no DHCP renewals — until the device is reset. The net_pkt and the net_buf fragments of the abandoned frame are likewise never unreferenced and never return to their pools. The security-relevant property is persistence: a momentary link flap leaves the interface permanently unable to send, so the denial of service outlasts the attacker's access to the link. There is no confidentiality or integrity impact. The fix adds a claim/release pair around the outstanding packet so that completion and abandonment are mutually exclusive, aborts an outstanding frame from the PHY callback on carrier loss (stopping the DMA, flushing the MTL transmit queue and reinitialising the descriptor ring), and arms a transmit watchdog, CONFIG_ETH_NXP_ENET_QOS_TX_TIMEOUT_MS, so that any non-completing DMA — not only a carrier loss — reclaims the transmit slot and the packet. It has a CVSS v3.1 base score of 6.5 (MEDIUM).
How severe is CVE-2026-90590? +
CVE-2026-90590 has a CVSS v3.1 score of 6.5 out of 10, rated MEDIUM. This is a medium-severity vulnerability that should be remediated as part of regular maintenance. The EPSS score is 0.0018, placing it in the 0th percentile for exploitation probability.
How do I check if I'm vulnerable to CVE-2026-90590? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-90590 — free, no signup required.

Patch and protect

Block known exploits with a web application firewall while you patch, keep your own devices clean, or test the fix on a fresh server.

Compare VPS prices →

Affiliate links: we may earn a commission, your price stays the same.