CVE-2026-90170

Published Sep 17, 2026

Description

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ipc response length before dereferencing its fields ipc_validate_msg() computes the expected message size by reading length fields out of the response buffer supplied by the userspace ksmbd daemon (payload_sz, session_key_len, ngroups, ...). Those fields are read before the buffer is verified to be large enough to contain the struct they belong to, so a short response makes the read land past the end of the allocation. handle_response() sizes entry->response purely from the netlink attribute length (nla_len()) and only guards the leading handle read, so the daemon can install a response as small as the kmalloc-8 object seen below. When ipc_msg_send_request() then calls ipc_validate_msg() for a KSMBD_EVENT_RPC_REQUEST, the cast to struct ksmbd_rpc_command reads resp->payload_sz at offset 8 of an 8-byte allocation: [ 3697.841381] ================================================================== [ 3697.844099] BUG: KASAN: slab-out-of-bounds in ipc_msg_send_request+0x763/0x800 [ 3697.846604] Read of size 4 at addr ffff888105f95910 by task kworker/4:3/20682 [ 3697.849061] [ 3697.849801] CPU: 4 UID: 0 PID: 20682 Comm: kworker/4:3 Not tainted 7.2.0-rc3-next-20260717-virtme #117 PREEMPT(lazy) [ 3697.850077] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 3697.850303] Workqueue: ksmbd-io handle_ksmbd_work [ 3697.850592] Call Trace: [ 3697.850794] <TASK> [ 3697.850952] __dump_stack+0x21/0x60 [ 3697.851239] dump_stack_lvl+0xc2/0x100 [ 3697.851528] print_address_description+0x77/0x200 [ 3697.851816] ? ipc_msg_send_request+0x763/0x800 [ 3697.852024] print_report+0x58/0x70 [ 3697.852316] kasan_report+0x117/0x150 [ 3697.852585] ? down_write+0x146/0x1f0 [ 3697.852809] ? ipc_msg_send_request+0x763/0x800 [ 3697.853082] ipc_msg_send_request+0x763/0x800 [ 3697.853385] ? __pfx_ipc_msg_send_request+0x10/0x10 [ 3697.853604] ? kasan_unpoison+0x48/0x70 [ 3697.853936] ? __pfx___up_read+0x10/0x10 [ 3697.854221] ksmbd_rpc_ioctl+0x380/0x520 [ 3697.854542] ? __pfx_ksmbd_rpc_ioctl+0x10/0x10 [ 3697.854757] ? kasan_unpoison+0x48/0x70 [ 3697.854962] ? copy_from_kernel_nofault+0x32c/0x4e0 [ 3697.855166] ? kasan_unpoison+0x48/0x70 [ 3697.855416] fsctl_pipe_transceive+0x139/0x7a0 [ 3697.855705] ? __pfx_copy_from_kernel_nofault+0x10/0x10 [ 3697.855937] ? __pfx_fsctl_pipe_transceive+0x10/0x10 [ 3697.856388] ? __sanitizer_cov_trace_switch+0x7b/0x140 [ 3697.856620] smb2_ioctl+0x1141/0x3420 [ 3697.856994] ? __pfx_smb2_ioctl+0x10/0x10 [ 3697.857182] ? get_smb2_cmd_val+0xe3/0x1c0 [ 3697.857655] handle_ksmbd_work+0x9ad/0x15e0 [ 3697.858034] ? __pfx_handle_ksmbd_work+0x10/0x10 [ 3697.858251] ? lock_release+0xf7/0x360 [ 3697.858466] ? process_scheduled_works+0x954/0x1600 [ 3697.858698] ? process_scheduled_works+0x954/0x1600 [ 3697.858905] process_scheduled_works+0xc22/0x1600 [ 3697.859368] ? __pfx_process_scheduled_works+0x10/0x10 [ 3697.859637] ? __pfx_assign_work+0x10/0x10 [ 3697.859896] ? lock_is_held_type+0x7b/0x110 [ 3697.860146] worker_thread+0x975/0xee0 [ 3697.860524] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 3697.860830] ? __kthread_parkme+0x21e/0x260 [ 3697.861105] kthread+0x3a6/0x490 [ 3697.861423] ? __pfx_worker_thread+0x10/0x10 [ 3697.861643] ? __pfx_kthread+0x10/0x10 [ 3697.861878] ret_from_fork+0x55a/0xa20 [ 3697.862194] ? __pfx_ret_from_fork+0x10/0x10 [ 3697.862480] ? __pfx_kthread+0x10/0x10 [ 3697.862714] ret_from_fork_asm+0x1a/0x30 [ 3697.862965] </TASK> [ 3697.863039] [ 3697.938882] Allocated by task 20761: [ 3697.940257] kasan_save_track+0x3e/0x80 [ 3697.941782] __kasan_kmalloc+0x72/0x90 [ 3697.943228] __kvmalloc_node_noprof+0x3e9/0x6a0 [ 3697.944948] handle_generic_event+0x59b/0x750 [ 3697.946592] genl_family_rcv_msg_doit+0x3d6/0x560 [ 3697.946977] genl_rcv_msg+0x67c/0x900 [ 3697.947224] netlink_rcv_skb+0x286/0x580 [ 3697.947488] genl_rcv+0x2d/0x80 [ 3 ---truncated---

Is your site exposed to CVE-2026-90170?

Run a free security scan — no signup, results in seconds.

References

Frequently Asked Questions

What is CVE-2026-90170? +
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ipc response length before dereferencing its fields ipc_validate_msg() computes the expected message size by reading length fields out of the response buffer supplied by the userspace ksmbd daemon (payload_sz, session_key_len, ngroups, ...). Those fields are read before the buffer is verified to be large enough to contain the struct they belong to, so a short response makes the read land past the end of the allocation. handle_response() sizes entry->response purely from the netlink attribute length (nla_len()) and only guards the leading handle read, so the daemon can install a response as small as the kmalloc-8 object seen below. When ipc_msg_send_request() then calls ipc_validate_msg() for a KSMBD_EVENT_RPC_REQUEST, the cast to struct ksmbd_rpc_command reads resp->payload_sz at offset 8 of an 8-byte allocation: [ 3697.841381] ================================================================== [ 3697.844099] BUG: KASAN: slab-out-of-bounds in ipc_msg_send_request+0x763/0x800 [ 3697.846604] Read of size 4 at addr ffff888105f95910 by task kworker/4:3/20682 [ 3697.849061] [ 3697.849801] CPU: 4 UID: 0 PID: 20682 Comm: kworker/4:3 Not tainted 7.2.0-rc3-next-20260717-virtme #117 PREEMPT(lazy) [ 3697.850077] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 3697.850303] Workqueue: ksmbd-io handle_ksmbd_work [ 3697.850592] Call Trace: [ 3697.850794] <TASK> [ 3697.850952] __dump_stack+0x21/0x60 [ 3697.851239] dump_stack_lvl+0xc2/0x100 [ 3697.851528] print_address_description+0x77/0x200 [ 3697.851816] ? ipc_msg_send_request+0x763/0x800 [ 3697.852024] print_report+0x58/0x70 [ 3697.852316] kasan_report+0x117/0x150 [ 3697.852585] ? down_write+0x146/0x1f0 [ 3697.852809] ? ipc_msg_send_request+0x763/0x800 [ 3697.853082] ipc_msg_send_request+0x763/0x800 [ 3697.853385] ? __pfx_ipc_msg_send_request+0x10/0x10 [ 3697.853604] ? kasan_unpoison+0x48/0x70 [ 3697.853936] ? __pfx___up_read+0x10/0x10 [ 3697.854221] ksmbd_rpc_ioctl+0x380/0x520 [ 3697.854542] ? __pfx_ksmbd_rpc_ioctl+0x10/0x10 [ 3697.854757] ? kasan_unpoison+0x48/0x70 [ 3697.854962] ? copy_from_kernel_nofault+0x32c/0x4e0 [ 3697.855166] ? kasan_unpoison+0x48/0x70 [ 3697.855416] fsctl_pipe_transceive+0x139/0x7a0 [ 3697.855705] ? __pfx_copy_from_kernel_nofault+0x10/0x10 [ 3697.855937] ? __pfx_fsctl_pipe_transceive+0x10/0x10 [ 3697.856388] ? __sanitizer_cov_trace_switch+0x7b/0x140 [ 3697.856620] smb2_ioctl+0x1141/0x3420 [ 3697.856994] ? __pfx_smb2_ioctl+0x10/0x10 [ 3697.857182] ? get_smb2_cmd_val+0xe3/0x1c0 [ 3697.857655] handle_ksmbd_work+0x9ad/0x15e0 [ 3697.858034] ? __pfx_handle_ksmbd_work+0x10/0x10 [ 3697.858251] ? lock_release+0xf7/0x360 [ 3697.858466] ? process_scheduled_works+0x954/0x1600 [ 3697.858698] ? process_scheduled_works+0x954/0x1600 [ 3697.858905] process_scheduled_works+0xc22/0x1600 [ 3697.859368] ? __pfx_process_scheduled_works+0x10/0x10 [ 3697.859637] ? __pfx_assign_work+0x10/0x10 [ 3697.859896] ? lock_is_held_type+0x7b/0x110 [ 3697.860146] worker_thread+0x975/0xee0 [ 3697.860524] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 3697.860830] ? __kthread_parkme+0x21e/0x260 [ 3697.861105] kthread+0x3a6/0x490 [ 3697.861423] ? __pfx_worker_thread+0x10/0x10 [ 3697.861643] ? __pfx_kthread+0x10/0x10 [ 3697.861878] ret_from_fork+0x55a/0xa20 [ 3697.862194] ? __pfx_ret_from_fork+0x10/0x10 [ 3697.862480] ? __pfx_kthread+0x10/0x10 [ 3697.862714] ret_from_fork_asm+0x1a/0x30 [ 3697.862965] </TASK> [ 3697.863039] [ 3697.938882] Allocated by task 20761: [ 3697.940257] kasan_save_track+0x3e/0x80 [ 3697.941782] __kasan_kmalloc+0x72/0x90 [ 3697.943228] __kvmalloc_node_noprof+0x3e9/0x6a0 [ 3697.944948] handle_generic_event+0x59b/0x750 [ 3697.946592] genl_family_rcv_msg_doit+0x3d6/0x560 [ 3697.946977] genl_rcv_msg+0x67c/0x900 [ 3697.947224] netlink_rcv_skb+0x286/0x580 [ 3697.947488] genl_rcv+0x2d/0x80 [ 3 ---truncated---
How do I check if I'm vulnerable to CVE-2026-90170? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-90170 — free, no signup required.