CVE-2026-80934

Published Sep 11, 2026

Description

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames (MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is always zero, so the unmap loop runs zero times and the skb DMA mapping in buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the generic DMA-ring cleanup skips it as well. Each AddBA req therefore leaks one TX DMA mapping, roughly one per (re)association. With WED enabled these mappings are bounced through the WED swiotlb pool, so under continuous client reconnect churn the pool is exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi MCU and other on-SoC consumers. Keep the deferred (token release) unmap that the design relies on, and add an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps buf[1] from the MAC-TXP layout for those frames, delegating to mt76_connac_txp_skb_unmap() otherwise.

Is your site exposed to CVE-2026-80934?

Run a free security scan — no signup, results in seconds.

References

Frequently Asked Questions

What is CVE-2026-80934? +
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames (MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is always zero, so the unmap loop runs zero times and the skb DMA mapping in buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the generic DMA-ring cleanup skips it as well. Each AddBA req therefore leaks one TX DMA mapping, roughly one per (re)association. With WED enabled these mappings are bounced through the WED swiotlb pool, so under continuous client reconnect churn the pool is exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi MCU and other on-SoC consumers. Keep the deferred (token release) unmap that the design relies on, and add an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps buf[1] from the MAC-TXP layout for those frames, delegating to mt76_connac_txp_skb_unmap() otherwise.
How do I check if I'm vulnerable to CVE-2026-80934? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-80934 — free, no signup required.