CVE-2026-19577

HIGH
Published Oct 11, 2026 Modified Oct 15, 2026 CWE-125

Description

net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it. The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor. The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact.

Is your site exposed to CVE-2026-19577?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

7.1
HIGH
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H

EPSS — Exploit Prediction

0.0022
Probability of exploitation
0.11%
Percentile rank

EPSS estimates the probability that this vulnerability will be exploited in the wild within the next 30 days. A higher score means more likely to be exploited.

Weakness Type (CWE)

CWE-125 Out-of-bounds Read

References

Frequently Asked Questions

What is CVE-2026-19577? +
net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it. The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unresolved state — for example by eliciting traffic to a spoofed, non-existent neighbor address so that net_ipv6_send_ns() creates an INCOMPLETE entry, or by sending a Router Advertisement with no source link-layer address option, which creates a persistently unresolved router neighbor — and then send a packet addressed to that neighbor. The result is an out-of-bounds read at a fixed index past the neighbor link-layer address array. On builds with CONFIG_ASSERT enabled the assertion fires and the device panics, giving a repeatable remote denial of service. With assertions disabled, the stale out-of-bounds struct net_linkaddr drives a memcmp() over an attacker-uninfluenced length and, when its len byte passes the NET_LINK_ADDR_MAX_LENGTH check, up to 8 bytes of unrelated static RAM are copied into the outgoing frame's destination link-layer address and transmitted on the link, disclosing them to any listener. There is no out-of-bounds write and the offset is not attacker-controlled, which bounds the impact. It has a CVSS v3.1 base score of 7.1 (HIGH).
How severe is CVE-2026-19577? +
CVE-2026-19577 has a CVSS v3.1 score of 7.1 out of 10, rated HIGH. This is a high-severity vulnerability that should be prioritized for patching. The EPSS score is 0.0022, placing it in the 0th percentile for exploitation probability.
How do I check if I'm vulnerable to CVE-2026-19577? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-19577 — free, no signup required.