CVE-2026-10668: zephyr DoS — Fix

Description

The Nuvoton NuMaker HSUSBD USB device-controller driver (drivers/usb/udc/udc_numaker.c) armed the control Data IN stage unconditionally (base->CEPTXCNT = len in numaker_hsusbd_ep_trigger). Because the HSUSBD hardware cannot disarm a control Data IN already armed for a previous transfer, a USB host that cancels an in-flight control transfer (timeout) and then issues a new SETUP packet can drive the driver out of sync: stale data may be transmitted in the new transfer and the control endpoint can become permanently stuck NAK'ing every subsequent control transfer. A malicious or buggy host (physical/adjacent attacker driving the bus) can repeatedly cancel-and-re-SETUP to wedge the device's USB control endpoint, denying service to the device's USB function (the device stops enumerating/responding on the control pipe) until a USB reset or re-plug. The flaw is an availability-only denial of service; the FIFO copy loops (bounded by net_buf length and the hardware BUFFULL flag) and the net_buf lifecycle are independent of the arming desync, so there is no out-of-bounds access, use-after-free, or information leak. The fix monitors the IN-token and new-SETUP events (k_event) and only arms control Data IN when an IN token is present and no new SETUP has arrived, cancelling the current transfer on a new SETUP. Affects boards using the Nuvoton NuMaker HSUSBD controller (CONFIG_UDC_NUMAKER with DT_HAS_NUVOTON_NUMAKER_HSUSBD_ENABLED); shipped in v4.4.0.

Is your site exposed to CVE-2026-10668?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

2.4

LOW

CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L

EPSS — Exploit Prediction

0.0016

Probability of exploitation

0.05%

Percentile rank

EPSS estimates the probability that this vulnerability will be exploited in the wild within the next 30 days. A higher score means more likely to be exploited.

Weakness Type (CWE)

CWE-400 Uncontrolled Resource Consumption

Affected Products

Vendor	Product	Versions
zephyrproject	zephyr	4.4.0 — 4.4.1

References

Advisories & Patches

https://github.com/zephyrproject-rtos/zephyr/commit/48e003326873e8bbc0ee4b67334e0dd8b5fb890f https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-rm28-x84j-4qrx

Frequently Asked Questions

What is CVE-2026-10668? +

The Nuvoton NuMaker HSUSBD USB device-controller driver (drivers/usb/udc/udc_numaker.c) armed the control Data IN stage unconditionally (base->CEPTXCNT = len in numaker_hsusbd_ep_trigger). Because the HSUSBD hardware cannot disarm a control Data IN already armed for a previous transfer, a USB host that cancels an in-flight control transfer (timeout) and then issues a new SETUP packet can drive the driver out of sync: stale data may be transmitted in the new transfer and the control endpoint can become permanently stuck NAK'ing every subsequent control transfer. A malicious or buggy host (physical/adjacent attacker driving the bus) can repeatedly cancel-and-re-SETUP to wedge the device's USB control endpoint, denying service to the device's USB function (the device stops enumerating/responding on the control pipe) until a USB reset or re-plug. The flaw is an availability-only denial of service; the FIFO copy loops (bounded by net_buf length and the hardware BUFFULL flag) and the net_buf lifecycle are independent of the arming desync, so there is no out-of-bounds access, use-after-free, or information leak. The fix monitors the IN-token and new-SETUP events (k_event) and only arms control Data IN when an IN token is present and no new SETUP has arrived, cancelling the current transfer on a new SETUP. Affects boards using the Nuvoton NuMaker HSUSBD controller (CONFIG_UDC_NUMAKER with DT_HAS_NUVOTON_NUMAKER_HSUSBD_ENABLED); shipped in v4.4.0. It has a CVSS v3.1 base score of 2.4 (LOW).

How severe is CVE-2026-10668? +

CVE-2026-10668 has a CVSS v3.1 score of 2.4 out of 10, rated LOW. This is a low-severity vulnerability with limited impact. The EPSS score is 0.0016, placing it in the 0th percentile for exploitation probability.

What products are affected by CVE-2026-10668? +

CVE-2026-10668 affects products from zephyrproject, specifically: zephyr. Check the affected products table above for specific version ranges.

How do I check if I'm vulnerable to CVE-2026-10668? +

You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

CVE-2026-45802

FPDI is a collection of PHP classes that facilitate reading pages from existing PDF documents and using them as templates …

CVE-2026-42343

FastGPT is an AI Agent building platform. In versions 4.14.13 and prior, the code-sandbox component suffers from insufficient resource isolation …

CVE-2025-41361

Uncontrolled resource consumption vulnerability in IDF v0.10.0-0C03-03 and ZLF v0.10.0-0C03-04. The devices improperly handle TLS requests associated with PROCOME sockets, …

CVE-2025-41360

Uncontrolled resource consumption vulnerability in IDF v0.10.0-0C03-03 and ZLF v0.10.0-0C03-04. The device is vulnerable to a packet flooding denial of …

CVE-2024-5422

An uncontrolled resource consumption of file descriptors in SEH Computertechnik utnserver Pro, SEH Computertechnik utnserver ProMAX, SEH Computertechnik INU-100 allows …

CVE-2025-50057

A DOS vulnerability in RSFiles! component 1.16.3-1.17.7 Joomla was discovered. The issue allows unauthenticated remote attackers to deny access to …

CVE-2026-10668