CVE-2026-10642

Description

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts.

CVSS v3.1 Score

6.5

MEDIUM

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

EPSS — Exploit Prediction

0.0019

Probability of exploitation

0.08%

Percentile rank

EPSS estimates the probability that this vulnerability will be exploited in the wild within the next 30 days. A higher score means more likely to be exploited.

Weakness Type (CWE)

CWE-835 CWE-835

References

Other References

https://github.com/zephyrproject-rtos/zephyr/commit/68e702294b711eadfe7b4fadedd46d7c87fe8f3d https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3fgh-73jh-2q5j

Frequently Asked Questions

What is CVE-2026-10642? +

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts. It has a CVSS v3.1 base score of 6.5 (MEDIUM).

How severe is CVE-2026-10642? +

CVE-2026-10642 has a CVSS v3.1 score of 6.5 out of 10, rated MEDIUM. This is a medium-severity vulnerability that should be remediated as part of regular maintenance. The EPSS score is 0.0019, placing it in the 0th percentile for exploitation probability.

How do I check if I'm vulnerable to CVE-2026-10642? +

You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

CVE-2025-27497

OpenDJ is an LDAPv3 compliant directory service. OpenDJ prior to 4.9.3 contains a denial-of-service (DoS) vulnerability that causes the server …

CVE-2025-29776

Azle is a WebAssembly runtime for TypeScript and JavaScript on ICP. Calling `setTimer` in Azle versions `0.27.0`, `0.28.0`, and `0.29.0` …

CVE-2025-32029

ts-asn1-der is a collection of utility classes to encode ASN.1 data following DER rule. Incorrect number DER encoding can lead …

CVE-2024-8088

There is a HIGH severity vulnerability affecting the CPython "zipfile" module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" …

CVE-2026-41146

facil.io is a C micro-framework for web applications. Prior to commit 5128747363055201d3ecf0e29bf0a961703c9fa0, `fio_json_parse` can enter an infinite loop when it …

CVE-2026-39806

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in mtrudel bandit allows unauthenticated remote denial of service via worker process …