CVE-2026-64014

Published Jul 19, 2026

Description

In the Linux kernel, the following vulnerability has been resolved: Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len.

Is your site exposed to CVE-2026-64014?

Run a free security scan — no signup, results in seconds.

References

Frequently Asked Questions

What is CVE-2026-64014? +
In the Linux kernel, the following vulnerability has been resolved: Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len.
How do I check if I'm vulnerable to CVE-2026-64014? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-64014 — free, no signup required.