CVE-2026-64006

Published Jul 19, 2026

Description

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ]

Is your site exposed to CVE-2026-64006?

Run a free security scan — no signup, results in seconds.

References

Frequently Asked Questions

What is CVE-2026-64006? +
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ]
How do I check if I'm vulnerable to CVE-2026-64006? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-64006 — free, no signup required.